IAM
Phone 00353 (0) 56 7765826
The Buzzard Evo range has been specifically designed for the large scale contractor and agency.
With a large choice in specification, and fully proportional controls.
Key Features:
- 7.25m or 8m reach
- 1.2m or 1.5m cutting heads
- Oil cooled as standard
- ICS fully proportional controls
Product Specifications
Standard = Standard Optional = Optional Not Available = Not Available
| Model | 7.25m T (23’9″) | 8.0m T (26’3″) |
|---|---|---|
Tractor Requirements |
||
| Minimum horse power | 120hp | 140hp |
| Minimum weight | 5500kg / 12125lbs | 6000kg / 13228lbs |
Base Unit Mounting Options |
||
| Front mount | Not Available | Not Available |
| Mid-mount | Not Available | Not Available |
| Rear mount | Standard | Standard |
| Three point linkage (CAT II) | Not Available | Not Available |
| Axle bracket | Standard | Standard |
Overall machine parameters |
||
| Machine weight with head and oil | 2290kg / 5049lbs | 2490kg / 5490lbs |
| Capacity of oil tank | 250 Litres / 66USG | 250 Litres / 66USG |
| Weight of machine with oil but without head | 2100kg / 4630lbs | 2290kg / 5049lbs |
Controls |
||
| Cable control (CC) | Not Available | Not Available |
| Low pressure hydraulics (LPH) | Not Available | Not Available |
| Electronic proportional control (EPP) | Not Available | Not Available |
| Intelligent control system (ICS) | Standard | Standard |
| Cable rotor reverse | Optional | Optional |
| Electronic rotor reverse | Standard | Standard |
Hydraulic system |
||
| System capability | 74 hp | 74hp |
| Pump flow rate | 125 Litres / 33USG | 125 Litres / 33USG |
| Pump type (Gear / Piston / Helical) | Gear | Gear |
| Pump arrangement (Twin / In-line) | Twin | Twin |
| Independent hydraulics | Standard | Standard |
| Oil cooler | Standard | Standard |
Arm features and main frame |
||
| Forward arm | Not Available | Not Available |
| Telescopic arm | Standard | Standard> |
| Telescopic arm stroke | 1300mm / 4’3″ | 1450mm / 4’9″ |
| Power slew | Standard | Standard |
| Power slew angle | 94° | 94° |
| Gravity breakout protection | Not Available | Not Available |
| Hydraulic breakout protection | Standard | Standard |
| Arm float – Manual operation | Not Available | Not Available |
| Arm float – Electronic operation | Standard | Standard |
| Head float – Manual operation | Optional | Optional |
| Head float – Electronic operation | Standard | Standard |
| Left hand cutting | Optional | Optional |
| Right hand cutting | Optional | Optional |
| Left and right hand cutting | Not Available | <Not Available |
Arm attachments available |
||
| Variable track bracket (VTB) | Optional | Optional |
| Sheartrim cutter bar | Optional | Optional |
| Pro-Saw | Optional | Optional |
| Ditch cleaner | Optional | Optional |
| Rotary head | Optional | Optional |
Accessories |
||
| Road lights | Standard | Standard |
| Debris blower | Optional | Optional |
| Cab guard kit | Standard | Standard |
Cutting Heads |
||
| 1.2m Pro-Cut with 115mm Roller | Standard | Standard |
| 1.2m Pro-Cut with 150mm Roller | Standard | Standard |
| 1.5m Pro-Cut with 115mm Roller | Optional | Optional |
| 1.5m Pro-Cut with 150mm Roller | Optional | Optional |
| 1.2m Pro-Cut ISMP with 115mm Roller | Optional | Optional |
| 1.2m Pro-Cut ISMP with 150mm Roller | Optional | Optional |
| 2m HD Head | Optional | Optional |
Flails
See the table below to see which flail heads are available for the different cutting heads listed above.
| BB | MP44 | HS60 | Pro Flail | T40 | T60 | True Cut | Bushmaster | |
|---|---|---|---|---|---|---|---|---|
| 1.2m Pro-Cut with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.2m Pro-Cut with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.5m Pro-Cut with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.5m Pro-Cut with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.2m Pro-Cut ISMP with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.2m Pro-Cut ISMP with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 2m HD head | Optional | Standard | Not Available | Not Available | Not Available | Not Available | Not Available | Not Available |
Need help chosing the right machine for you?
CONTACT OUR SALES TEAM NOW
IAM Sales
Martin Owens
Niall Lavery
JP Hearn
Working Reach Dimensions
Head used to calculations: 1.2 Pro-Cut
| 7.25m T (23’9″) | 8.0m T (26’3″) | |||
|---|---|---|---|---|
| A | 7.3m | 23’11” | 7.94m | 26’1″ |
| B | 7.64m | 25’1″ | 8.07m | 26’6″ |
| C | 5.25m | 17’7″ | 5.91m | 19’5″ |
| D | 6.25m | 20’6″ | 6.86m | 22’6″ |
| E | 8.71m | 28’7″ | 8.87m | 29’1″ |
| X | 1.35m | 4’7″ | 1.35m | 4’7″ |
| Y | 1.0m | 3’3″ | 1.0m | 3’3″ |