The Falcon Evo VFA (Variable Forward Arm) is perfect for contractors and municipal environments, where the added benefits of a forward arm is required to improve visibility.
This flagship model in the VFA range provides an unrivalled 2.1m total travel including 1.8m forward reach, resulting in an optimum mid-mounted cutting head position.
Standard = Standard Optional = Optional Not Available = Not Available
Model | 6.5m P VFA (21’4″) |
---|---|
Tractor Requirements |
|
Minimum horse power | 120hp |
Minimum weight | 5500kg / 12125Lbs |
Base Unit Mounting Options |
|
Front mount | Not Available |
Mid-mount | Not Available |
Rear mount | Standard |
Three point linkage (CAT II) | Not Available |
Axle bracket | Standard |
Overall machine parameters |
|
Machine weight with head and oil | 2270kg / 5005Lbs |
Capacity of oil tank | 250 Litres / 66USG |
Weight of machine with oil but without head | 2050kg / 4519Lbs |
Controls |
|
Cable control (CC) | Not Available |
Low pressure hydraulics (LPH) | Not Available |
Electronic proportional control (EPP) | Optional |
Intelligent control system (ICS) | Standard |
Cable rotor reverse | Optional |
Electronic rotor reverse | Optional |
Hydraulic system |
|
System capability | 74 hp |
Pump flow rate | 125 Litres / 33usg |
Pump type (Gear / Piston / Helical) | Gear |
Pump arrangement (Twin / In-line) | Twin |
Independent hydraulics | Standard |
Oil cooler | Standard |
Arm features and main frame |
|
Forward arm | 1816mm / 6′ |
Telescopic arm | Not Available |
Telescopic arm stroke | Not Available |
Power slew | Standard |
Power slew angle | 94° |
Gravity breakout protection | Not Available |
Hydraulic breakout protection | Standard |
Arm float – Manual operation | Optional |
Arm float – Electronic operation | Optional |
Head float – Manual operation | Standard |
Head float – Electronic operation | Optional |
Left hand cutting | Optional |
Right hand cutting | Optional |
Left and right hand cutting | Not Available |
Arm attachments available |
|
Variable track bracket (VTB) | Not Available |
Sheartrim cutter bar | Optional |
Pro-Saw | Optional |
Ditch cleaner | Optional |
Rotary head | Optional |
Accessories |
|
Road lights | Standard |
Debris blower | Optional |
Cab guard kit | Standard |
Cutting Heads |
|
1.2m Pro-Cut with 115mm Roller | Standard |
1.2m Pro-Cut with 150mm Roller | Standard |
1.5m Pro-Cut with 115mm Roller | Optional |
1.5m Pro-Cut with 150mm Roller | Optional |
1.2m Pro-Cut ISMP with 115mm Roller | Optional |
1.2m Pro-Cut ISMP with 150mm Roller | Optional |
2m HD head | Optional |
See the table below to see which flail heads are available for the different cutting heads listed above.
BB | MP44 | HS60 | Pro Flail | T40 | T60 | True Cut | Bushmaster | |
---|---|---|---|---|---|---|---|---|
1.2m Pro-Cut with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
1.2m Pro-Cut with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
1.5m Pro-Cut with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
1.5m Pro-Cut with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
1.2m Pro-Cut ISMP with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
1.2m Pro-Cut ISMP with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
2m HD head | Optional | Standard | Not Available | Not Available | Not Available | Not Available | Not Available | Not Available |
CONTACT OUR SALES TEAM NOW
IAM Sales
Martin Owens
Niall Lavery
JP Hearn
Head used to calculations: 1.2 Pro Cut
Side Reach – 6.5m P VFA (21’4) |
||
---|---|---|
A | 6.5m | 21’4 |
B | 6.83m | 22’5″ |
C | 4.61m | 15’2″ |
D | 6.03m | 18’9″ |
E | 7.66m | 25’2″ |
Y | 1.6m | 5’3″ |
X | 1.0m | 3’4″ |
Forward Reach – VFA 6.5m P (21’4) | ||
---|---|---|
A | 6.61m | 21’8″ |
F | 5.93m | 19’5″ |
G | 6.4m | 21′ |
H | 1.82m | 6′ |
J | 0.9m | 2’11” |