IAM
Phone 00353 (0) 56 7765826
The Hawk Evo Forward arm is perfect for farmers, contractors and municipal environments where the added benefits of a forward arm is required to improve visibility and minimise operator stress and fatigue.
Fitted as standard with the powerful 125 litre drive system, the Hawk Evo Forward will perform on all stages. There is a choice of controls and attachments to suit a wide range of applications.
Key Features:
- 5.4m or 6.0m reach
- Heavy Duty Linkage
- 125 l/min independent system
- 1.2m or 1.5m cutting head
- Non parallel
Product Specifications
Standard = Standard Optional = Optional Not Available = Not Available
| Model | FWD 5.4 (17’9″) | FWD 6.0 (19’8″) |
|---|---|---|
Tractor Requirements |
||
| Minimum horse power | 65hp | 70hp |
| Minimum weight | 4500kg / 9921Lbs | 5000kg / 11023Lbs |
Base Unit Mounting Options |
||
| Front mount | Not Available | Not Available |
| Mid-mount | Not Available | Not Available |
| Rear mount | Standard | Standard |
| Three point linkage (CAT II) | Standard | Standard |
| Axle bracket | Optional | Optional |
Overall machine parameters |
||
| Machine weight with head and oil | 1640kg / 3616Lbs | 1740kg / 3836Lbs |
| Capacity of oil tank | 200L / 53USG | 200L / 53USG |
| Weight of machine with oil but without head | 1400kg / 3086Lbs | 1500kg / 3307Lbs |
Controls |
||
| Cable control (CC) | Standard | Standard |
| Low pressure hydraulics (LPH) | Optional | Optional |
| Electronic switch control (ESC) | Optional | Optional |
| Electronic proportional control (EPP) | Optional | Optional |
| Intelligent control system (ICS) | Optional | Optional |
| Cable rotor reverse | Optional | Optional |
| Electronic rotor reverse | Optional | Optional |
Hydraulic system |
||
| System capability | 74hp | 74hp |
| Pump flow rate | 125L / 33Usg | 125L / 33Usg |
| Pump type (Gear / Piston / Helical) | Gear | Gear |
| Pump arrangement (Twin / Tandem Inline) | Twin | Twin |
| Independent hydraulics | Standard | Standard |
| Oil cooler | Optional | Optional |
Arm features and main frame |
||
| Forward reach arm | Standard | Standard |
| Forward reach | 800mm / 2’6″ | 800mm / 2’6″ |
| Power slew | Standard | Standard |
| Power slew angle | 94° | 94° |
| Gravity breakout protection | Not Available | Not Available |
| Hydraulic breakout protection | Standard | Standard |
| Arm float – Manual operation | Optional | Optional |
| Armfloat – Electronic operation | Optional | Optional |
| Head float – Manual operation | Standard | Standard |
| Head float – Electronic operation | Optional | Optional |
| Left hand cutting | Optional | Optional |
| Right hand cutting | Optional | Optional |
| Left and right hand cutting | Not Available | Not Available |
Arm attachments available |
||
| Variable track bracket (VTB) | Not Available | Not Available |
| Sheartrim cutter bar | Optional | Optional |
| Pro-Saw | Optional | Optional |
| Ditch cleaner | Optional | Optional |
| Rotary head | Optional | Optional |
Accessories |
||
| Road Lights | Standard | Standard |
| Debris Blower | Optional | Optional |
| Cab Guard Kit | Standard | Standard |
Cutting Heads |
||
| 1.2m Pro-Trim with 115mm roller | Standard | Standard |
| 1.2m Pro-Trim with 150mm roller | Standard | Standard |
| 1.2m Pro-Trim ISMP with 115mm roller | Optional | Optional |
| 1.2m Pro-Trim ISMP with 150mm roller | Optional | Optional |
| 1.5m Pro-Trim with 115mm roller | Optional | Optional |
| 1.5m Pro-Trim with 150mm roller | Optional | Optional |
Flails
See the table below to see which flail heads are available for the different cutting heads listed above.
| BB | MP44 | HS60 | Pro Flail | T40 | T60 | True Cut | Bushmaster | |
|---|---|---|---|---|---|---|---|---|
| 1.2m Pro-Trim with 115mm Roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Not Available |
| 1.2m Pro-Trim with 150mm Roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Not Available |
| 1.2m Pro-Trim ISMP with 115mm Roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Standard |
| 1.2m Pro-Trim ISMP with 150mm Roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Standard |
| 1.5m Pro-Trim with 115mm Roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Not Available |
| 1.5m Pro-Trim with 150mm Roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Not Available |
Need help chosing the right machine for you?
CONTACT OUR SALES TEAM NOW
IAM Sales
Martin Owens
Niall Lavery
JP Hearn
Working Reach Dimensions
Head used to calculations: 1.2 Pro Trim
| FWD 5.5m (17’9″) | FWD 6.0m (19’8″) | |||
|---|---|---|---|---|
| A | 5.36m | 17’7″ | 5.96m | 19’7″ |
| B | 5.52m | 18’1″ | 6.08m | 19’11” |
| C | 3.50m | 11’6″ | 4.21m | 13’10” |
| D | 4.87m | 16′ | 5.19m | 17′ |
| E | 6.65m | 21’10” | 7.27m | 23’8″ |
| X | 1.35m | 4’5″ | 1.35m | 4’5″ |
| Y | 1.0m | 3’3″ | 1.0m | 3’3″ |