The Microklippa is very popular with estate managers and horticulturists who admire the Microklippa’s fine cutting capabilities when hedge trimming and the versatility of the right or left hand cutting.
The Microklippa can be used on a range of power units from small compact tractors to small pivot steer loaders, in conjunction with a front mount kit.
Standard = Standard Optional = Optional Not Available = Not Available
Models | 3.2m (10’5″) | 3.5m (11’5″) |
---|---|---|
Tractor Requirements
|
||
Minimum Horse Power |
15hp | 15hp |
Minimum Weight |
550kg / 1213lbs | 550kg / 1213lbs |
Base Mounting Options
|
||
Front Mount |
Not available | Not available |
Mid Mount |
Not available | Not available |
Rear Mount | Standard | Standard |
Three Point Linkage (CAT II) | Standard | Standard |
Axle Bracket | Not available | Not available |
Overall Machine Parameters |
||
Machine weight | 192kg / 423lbs | 201kg / 443lbs |
Capacity of oil tank |
Not available | Not available |
Controls
|
||
Cable control (CC) | Standard | Standard |
Low pressure hydraulics (LPH) | Not available | Not available |
Electronic proportional control (EPC) | Optional | Optional |
Intelligent control system (ICS) | Not available | Not available |
Cable rotor reverse | Not available | Not available |
Electronic rotor reverse | Not available | Not available |
Arm features and main frame |
||
Telescopic arm | Not available | Not available |
Telescopic arm stroke | Not available | Not available |
Power slew | Not available | Not available |
Power slew angle | Not available | Not available |
Gravity breakout | Standard | Standard |
Hydraulic breakout | Not available | Not available |
Armfloat – manual | Not available | Not available |
Armfloat – electronic | Not available | Not available |
Headfloat – manual | Not available | Not available |
Headfloat – electronic | Not available | Not available |
Left hand cutting | Not available | Not available |
Right hand cutting | Not available | Not available |
Left and right hand cutting | Standard | Standard |
Cutting heads |
||
Rotary Head | Not available | Not available |
1.2m and 1.5m cutterbars | Optional | Optional |
Ditch cleaner | Not available | Not available |
CONTACT OUR SALES TEAM NOW
IAM Sales
Martin Owens
Niall Lavery
JP Hearn
Head used for calculations: 1.2m Cutterbar
3.2m (10’5) | 3.5m (11’5) | ||||
---|---|---|---|---|---|
A |
3.10m | 10’2″ | 3.4m | 11’2″ | |
B |
3.20m | 10’6″ | 3.50m | 11’6″ | |
C |
2.00m | 6’6″ | 2.30m | 7’7″ | |
D |
3.10m | 10’2″ | 3.50m | 11’6″ | |
E |
4.20m | 13’9″ | 4.50m | 14’9″ | |
X |
1.00m | 3’4″ | 1.00m | 3’4″ | |
Y |
1.34m | 4’7″ | 1.34m | 4’7″ |